Floodlights and Gyre Pro

Credit: George Mavrakis and Georgia Aquarium

Maxspect commercial products, providing solutions to your needs

F150W / F300W / F500W

F200W / F400W / F600W

Gyre Pro XFP1400

Engineering Cases

Click on the photo for details

Enhanced coral growth and coloration under Maxspect LED light

Maxspect LED is designed to provide all ranges of color spectrum required by corals and plants to enhance their growth rate, improve their coloration and at the same time giving your aquarium the most aesthetically pleasing combination of colors.

2010/6/20

2010/7/4

2010/9/13

2011/1/16

2011/1/25

2011/1/29

2011/3/13

2011/4/10

2011/6/12

2011/7/31

2011/12/6

2012/1/29

Maxspect commercial products, providing solutions to your needs

The Maxspect commercial floodlights come with six different models: F150W, F300W, F500W, F200W, F400W & F600W.

Design Highlights of the F150W / F300W / F500W Commercial Floodlight

Overclocking triple pure copper heat dissipation technology: larger heat dissipation area for faster cooling, effectively extending the lifespan of the lighting fixture.
Adjustable bracket for multi-angle support, allowing freedom to change the illumination angle.

Actual data presentation for F500W

F500W-14000k AAI Figure

Note: The Curves indicate the illuminated area and the average illumination when the luminaire is at a different distance

F500W 25DEG

Note: The Curves indicate the illuminated area and the average illumination when the luminaire is at a different distance

F500W 60DEG

Note: The Curves indicate the illuminated area and the average illumination when the luminaire is at a different distance

F500W 100DEG

Design Highlights of the F200W / F400W / F00W Commercial Floodlight

Slim body design, suitable for installations with limited head space.
Adjustable bracket for multi-angle support, allowing freedom to change the illumination angle.
Equipped with integrated custom lens for precise targeted illumination.

F600W-20000K

F200W PAR Distribution

F400W PAR Distribution

F600W PAR Distribution

Actual data presentation for F400W

Note: The Curves indicate the illuminated area and the average illumination when the luminaire is at a different distance

Note: The Curves indicate the illuminated area and the average illumination when the luminaire is at a different distance

Note: The Curves indicate the illuminated area and the average illumination when the luminaire is at a different distance

Note: The Curves indicate the illuminated area and the average illumination when the luminaire is at a different distance

Design for ultra large aquarium

Max Flow rate up to 100 Tons per hour

Superior crossflow technology explained

Comparing to traditional powerheads and wavemakers, based on propeller nozzle technology, our latest gyre generator is based on crossflow technology.

Crossflow technology

A. Virtually no dead spots.
B. Evenly distributed flow rate throughout the entire aquarium.
C. Water bounces back from the other side to create a full circulation, ie. generating "gyre flows".

Propeller nozzle technology

A. Dead spots with relatively poor water movement.
B. Very strong flow in the center, making coral placement very difficult.
C. Very weak flow near the other end of the aquarium.

Near-silent operation with sine wave technology

Sine Wave Pattern

Electricity current alternates in a much smoother pendulum while using Sine Wave Technology

Sin Wave Technology Decibel Level.

Traditional Pattern

Electricity current alternates in a very sharp pattern while using traditional technology

Traditional technology Decibel Level

Achieve full circulation within the aquarium with ease

Circulation technology broadens the wave-making area, maximizing water flow coverage to minimize blind spots within the aquarium. This ensures the actual whole-tank circulation, allowing the aquarium's living lives to experience a simulated natural water flow.

Dimension: 7 x 4 x 1.5m (23' x 13' x 5')

Crossflow technology

Only four (4) units of Gyre Pro XFP1400 are needed to circulate this large tank.

Propeller nozzle technology

If this tank were powered by traditional pumps, it would require at least twelve (12) units if not more.

You can now replace your "DUMP BUCKET" systems with gyre pro

Dump Buckets were used for public aquariums to aerate surface water and create a "wave-like" water flow. However it also is a nightmare to maintain, salt creep will form all around the equipment.

Now you can replace your Dump Bucket system with Gyre Pro XFP1400, which can also aerate surface water and create natural wave like water flow, without the hassle of using Dump Buckets.

Adequate water flow is crucial to growth and healthiness of corals and fishes

Water current brings in oxygen-rich water along with nutrients and planktons to corals and fishes, as well as removing waste and organic matter produced by them.

Specifications

For lens and reflector cup selection:

Narrower angles result in higher central beam intensity, a smaller focal point, and better light efficiency. Conversely, wider angles correspond to reduced light energy efficiency, though they result in a larger illuminated area.
For longer and more distant illumination, a narrower angle is preferable. In other words, as the installation distance above the water surface increases, opting for a narrower angle is recommended.
At the same installation height, choosing a narrower angle will result in a correspondingly reduced illumination range.

F150W

Reflector cup angle	90° / 60° / 45° / 25°
Color temperature	7000k / 10000k / 14000k / RGB / Full spectrum
1 LED channel, individually adjustable
Wi-Fi controls / DMX controls / 0-10v controls

F300W

Reflector cup angle	90° / 60° / 45° / 25°
Color temperature	7000k / 10000k / 14000k / RGB / Full spectrum
2-4 LED channels, individually adjustable
Wi-Fi controls / DMX controls / 0-10v controls

F500W

Reflector cup angle	90° / 60° / 45° / 25°
Color temperature	7000k / 10000k / 14000k / RGB / Full spectrum
2-4 LED channels, individually adjustable
Wi-Fi controls / DMX controls / 0-10v controls

F200W

Lens angle	15° / 30° / 60° / 90°
Color temperature	8000k / 11000k / 15000k / 20000k / Full spectrum
1 LED channel, individually adjustable
Wi-Fi controls / DMX controls / 0-10v controls

F400W

Lens angle	15° / 30° / 60° / 90°
Color temperature	8000k / 11000k / 15000k / 20000k / Full spectrum
2 channels, individually adjustable
Wi-Fi controls / DMX controls / 0-10v controls

F600W

Lens angle	15° / 30° / 60° / 90°
Color temperature	8000k / 11000k / 15000k / 20000k / Full spectrum
2 channels, individually adjustable
Wi-Fi controls / DMX controls / 0-10v controls

F150W

F300W

F500W

F200W, F400W, F600W

Installation

Light shield and Anti-glare mesh

Suitable for open-top aquariums, effectively controlling the light spot illumination range and enhancing the viewing experience for visitors (additional purchase is required)

Only lamp body is included

You can choose to install the anti-glare mesh or the light shield separately. Alternatively, you have the option to install both the anti-glare and the light shield simultaneously.

XFP1400 Specifications

Water movement mode sample diagram

Fully programmable 24 hours gyre flow cycle

Input	100-240v 50/60Hz
Output	DC 36V
Power Range	120-450w
Flow Rate	30,000 -100,000l/h 8,000 -26,400 G/h
Velocity	0.5-2.4 m/s 1.6-7.9 ft/s
Weight	7kg / 15.4lbs
Cable	10m / 20m / 30m 33ft / 66ft / 98ft
Depth	10m / 20m / 30m 33ft / 66ft / 98ft
Dimension	580x148x100mm 22.8"x5.8"x3.9"

Input	100 -240v 50/60Hz	Weight	7kg/15.4 lbs
Output	DC 36v	Cable	10m / 20m / 30m
Power Range	120 - 450w	Cable	33ft / 66ft / 98ft
Flow Rate	30,000 - 100,000L/H	Depth	10m / 20m /30m
Flow Rate	8,000 - 26,400 G/H	Depth	33ft / 66ft / 98ft
Velocity	0.5 - 2.4 m/s	Dimension	580 x 148 x 100mm
Velocity	1.6 - 7.9 ft/s	Dimension	22.8" x 5.8" x 3.9"

Acrylic bracket solution

PVC bracket solution

Piping Installation

The Illustration shown above are examples for your reference only and it is not limited to these installation solutions.

The required components are not included in the package, if necessary it needs to be ordered separately and custom made according to the specific case.