GYRE GENERATOR
Gyre 200 Series Advanced Controller
The new Gyre 200 Series Advanced
Controller is packed with features

• Controls two Gyre pumps simultaneously.

• Comes with an OLED display (128x64 resolution).

• Built-in high-accuracy timer, user can setup different flow pattern during different time of the day.

• Support back-up battery (sold separately).

Water Movement Mode

  • Constant Speed Mode
  • Pulsing Mode
  • Gradual Pulsing Mode
  • Random Mode
  • Alternating Gyre Mode

Link-up Method

  • Synchronized
  • Anti-Synchronized
  • Timed Delay
  • Reversed Timed Delay
Break free from limitations!

With 5 water movement modes,4 ways to link up the pumps,2 preset cycles and a programmable 24 hours cycle - there is no more limitation on how you can set up the water circulation in your tank!

The all new "1-Controller-2-Pumps System"
Water Movement Mode Sample Diagram
24-hours Cycle Illustrated
Preset 1-Lunar Tidal Cycle (LTC)

The Lunar Tidal Cycle (LTC) is a 24-hours cycle that mimics the kind of water current in the ocean during high and low tides.

Preset 2-Oceanic Gyre Cycle(OGC)

The Oceanic Gyre Cycle (OGC) is a 24-hours cycle that creates a gentle alternating gyre circulation within your aquarium.

INTRODUCING GYRE 200 SERIES
ADVANCED CONTROLLER
A pair of Gyre XF250 running Alternating Gyre Mode
in Anti-Synchronized method

Model Specification
  XF230 XF250 XF280
Power Consumption: 8w-35w 8w-60w 10w-80w
Flow Rate: 8000-9000 L/h
(2100-2300 Gal/h)
18000-20000 L/h
(4800-5300 Gal/h)
21000-22500 L/h
(5550-6000 Gal/h)
Suitable for Aquarium: 100-400L (25-100 Gal) 200-3000L (50-800 Gal) 750-3800L (200-1000 Gal)
Power Supply Unit: 100-240V / 50-60Hz 100-240V / 50-60Hz 100-240V / 50-60Hz
Dimensions (L × W × H): 255mm × 75mm × 40mm (10” × 2.95” × 1.57”) 300mm × 73mm × 60mm (11.8” × 2.9” × 2.4”) 378mm × 95mm × 52mm (14.8” × 3.8” × 2”)
Weight: 650g(1.4 lb) 850g(1.9 lb) 1000g(2.2 lb)
Cable length:      
Controller to pump 2m(6.6’) 2m(6.6’) 2m(6.6’)
Power supply to controller 1.5m(4.9’) 1.5m(4.9’) 1.5m(4.9’)
Glass thickness:      
Standard Mount 20mm(3/4”) 20mm(3/4”) 30mm(1.2”)
Reinforcement Mount 25mm(1”) 25mm(1”) 38mm(1.5”)